AK Building Tools

		AK-47 Folding Stock Receiver Reinforcement Plates The bottom plate is for the Bulgarian/Russian Sidefolders and the top plate is for the Polish style underfoder. These are not needed on the Yugo's unless you aren't using the original pistol grip mounting plate. This plate welds to the rear lower section of the receiver to strengthen that area when using folding stocks. As shown it is set-up for an underfolder. The bend is in the right spot and not touching the hole so there are not fitting issues. These will need to be spot welded on the Receiver. Please choose either Polish Under folder (Same as Hungarian models) or Sidefolding (Russian or Bulgarian models). You do not need this piece if you are going to use the Tapco Folding Stock. MSRP: $ 10.00 Sales Price: $ 10.00
		Qty:

		AK-47 Top Rail Layout Scribe Jig Use this tool after bending the top rails on your flat to scribe where to trim your top rails. All you do is put some layout die or paint on the top rails and line the jig up with the front of the receiver then scribe a line down the rail. It's a perfect way to make the initial cuts with either a dremel tool or milling machine. These are made out of 6061 aluminum on a CNC machining center so don't expect to clamp it on and use it as a guide for a dremel. After making your initial cuts with the cut-off wheel use the small sanding drum to put the radius in the corners to make it look more original. MSRP: $ 24.99 Sales Price: $ 24.99
		Qty: